+91 99099 62080 · Mon–Sat · 9:00–19:00
Bhaavya Ecopack engineers corrugated packaging for the solar energy industry — solving edge strikes and panel flex with tested, made-to-order boxes from our Surat plant, quoted within 4 business hours.
Solar modules are large, thin and glass-faced; packaging norms centre on edge protection, vertical packing and vibration tolerance for project-site last miles.
| Typical ply | 5 & 7-ply |
|---|---|
| Protection | Edge guards + separators |
| Packing | Vertical module systems |
| Transit | Vibration-tolerant builds |
| Printing | Up to 4-colour multicolour flexo |
| Quotation | Within 4 business hours |
Stacking strength is engineering, not guesswork. Box Compression Test (BCT) capacity can be estimated with the McKee formula — BCT ≈ 5.87 × ECT × √(board caliper × box perimeter) — and then verified on the actual box. We apply safety factors of 2× for short-cycle distribution up to 4× for long-hold warehousing (per ASTM D642 practice), because long-term usable strength under load creep is only 50–60% of the peak laboratory value.
Every tonne of recycled-fibre corrugated board avoids roughly 180 kg of CO₂ versus virgin production (DEFRA life-cycle factors), and industry equivalences credit each tonne of recycled paper with saving about 17 trees, ~26,500 litres of water and ~4,000 kWh of energy (US EPA). Corrugated is also India’s practical answer to the single-use-plastic phase-out: recyclable, repulpable and biodegradable in weeks rather than centuries.
Yes — engineered for vibration and edge impact typical of project logistics.
Pack counts and dimensions follow your module and pallet standard.
It depends on packed weight, stack height and transit humidity — our engineers spec ply, ECT and coating from those three facts, referenced to IS 2771:2022 minimums, and validate by testing before production.
Yes — scheduled routes cover Surat, Hazira, Bharuch, Ankleshwar, Navsari, Vapi and the full 160 km radius around our Kosamba plant, with pan-India programmes beyond it. Quotations in 4 business hours.
Structure, ply and print matched to your product — quotation within 4 business hours.
Request a Quote